The corresponding DVB-T receivers

List of receivers, posted on this site, states receivers, for which manufacturers gain the right to use digital stickers. Basis for the acquisition of permit the execution of tests of compliance with the technical requirements of a digital television signal reception in Slovenia.

List of relevant independent digital converter (“DVB-T STB”)

[table id=8 /]

List of relevant digital (DVB-T) TV

[table id=9 /]


SD – Standard Definition

HD – High definition

* –  does not support  Digital Dolby (AC3)

DVB-T permitted tolerances

List of permitted tolerances with comments

The table below provides a list of permissible tolerances from APEK technical requirements, which do not significantly affect the user experience in receiving and watching TV programs were taken into account in the granting of licenses for the use of labels.
This list is not exhaustive and may be supplemented in the case of established tolerances of new models.

[table id=10 /]

Below is a table with examples of the unacceptable tolerances of technical data of the receivers from tehnical specifications:

[table id=11 /]



DVB-T Slovenia

The purpose of the project

preklopite na digitalno

Successful transition from analogue to digital terrestrial broadcasting depends primarily on the provision of universal acceptance of users who often feel resistance to change and do not know the benefits of digital television brings. Therefore, it is essential that end-users are in the phase transition step by step and systematically guided and informed in order to maximize the adoption of the new technology offers in terms of content, services and formats that will be available with digital technology. Steps to monitor the process of the transition to digital broadcasting are as follows:

— The transition from analogue to digital broadcasting,

— Extension offers well-known and accepted services and content,

— Improvements offers well-known and accepted services and content (16:9, navigation, image quality / HDTV),

— New programming and distribution formats (interactivity, Datacasting, portability, mobility, such as MHP and DVB-H).[dt_divider style=”gap”/]

At the end-user will have made the transition to digital broadcasting major impact. The whole process should therefore be planned and implemented with caution. The transition must include appropriate methods of communication and information for end users, especially the advantages and changes brought by the transition. Following information for users should be provided free of charge:[dt_divider style=”gap”/]

— transition of process (like planned date to switch off analogue broadcasting activities in the various regions and areas, …),

— availability of services (type of services, programs, …),

— availability and adequacy of receivers (receivers types, prices, …),

— changes in connectivity to end users (configuration, connect to other devices, …),

— contact in case of problems.[dt_divider style=”gap”/]

In addition, it is necessary to provide more specific information for software vendors. Choosing an appropriate external receiver or TV without adequate support can be unfavorable experience. Research shows that 40% of users do not even know what the connection is available (for example, terrestrial or cable).[dt_divider style=”gap”/]

Any market or country must prepare a transition plan that includes steps and presented prioritize and combine steps according to the specifics of local markets and business models. However, during the transition and in particular every step necessary to ensure compatible equipment, providing end-users with a satisfactory choice and to take advantage of the services and content. Examples of good practice in countries that have tackled the transition between the first show that success is guaranteed only if it is on the market as soon as a sufficient number of different types of receivers, from simple – low-cost receivers, all the way up to advanced, including PVR functionality and interactive services at a later stage. It is especially important that the receivers are very early, ensuring proper desirability of all participants, thereby reducing delays in achieving the full benefits of the digital transition.[dt_divider style=”gap”/]

One of the first steps for the provision of appropriate receivers on the market, preparation of requirements and specifications for the receivers, where it is recommended to minimize the deviation from the general requirements adopted in most countries of the European Union. Thus, to the addition of specific national requirements limited to a minimum or eliminated over time.[dt_divider style=”gap”/]
Specifications for DVB-T receivers – Standard Definition (SD) were in the Republic of Slovenia has prepared, as well as the test specifications for the conformity assessment. In addition, they carried out the first measurements of compliance, which was duly published. The following is to ensure a successful transition to the RS HD is necessary to specify a profile that will primarily reduce uncertainty about the adequacy of equipment suppliers receivers for time and production will be broadcast in high-definition format actually began.[dt_divider style=”gap”/]
Specifications subject of the project is to prepare sets of specifications and conformity assessment procedures for digital terrestrial broadcasting in MPEG4-based coding standard for high definition television (hereinafter: HDTV – High Definition Television). Specifications and procedures for conformity assessment will take into account the content of existing specifications for standard definition receivers. Specifications include the following segments:[dt_divider style=”gap”/]
— combined SD and HD resolution
— Integrated Receivers (IRD) and STB (set top box)
— Profile: Baseline